(6)
Release the harness from the harness clamp
and take off the exhaust fan with the duct.
(7)
Release the harness from the harness
clamp, remove the two-sided tape and take
off the exhaust fan.
[Q] Temperature/humidity sensor (S3)
(1)
Take off the left cover.
P.2-19 "[C] Left cover"
(2)
Disconnect 1 connector, remove 1 screw,
and then take off the temperature/humidity
sensor.
e-STUDIO163/203 DRUM RELATED SECTION
Duct
Temperature/
Humidity sensor
11 - 20
Duct
Fig. 11-35
Exhaust fan
Fig. 11-36
Fig. 11-37
December 2005 © TOSHIBA TEC