Toshiba e-STUDIO163 Service Manual page 70

(C) Misfeed in equipment
• Exit sensor detects jamming of the leading edge of paper.
Registration clutch ON
Less than 1.808 sec.
Exit sensor ON
If the exit sensor is not turned ON after 1.808
sec,
Paper jam (E01)
stopped.
• Exit sensor detects jamming of the tailing edge of paper.
Registration clutch OFF
Less than 1.759 sec.
Exit sensor OFF
If the exit sensor is not turned OFF after 1.759
sec,
Paper jam (E02)
stopped.
• Immediately after the power ON
Any of all sensors on paper transport path detects paper (ON)
Paper jam (E03)
• Front cover is opened during copying
Paper jam (E41)
• Registration sensor detects jamming of the leading edge of paper:
Registration sensor is not turned ON in a fixed period of time after the pickup solenoid is turned
ON.
Paper jam (E21 and E09)
e-STUDIO163/203 GENERAL OPERATION
The copying operation is
The copying operation is
4 - 8
T.B.D.
Fig. 4-1
T.B.D.
Fig. 4-2
December 2005 © TOSHIBA TEC