Disassembly And Replacement - Toshiba e-STUDIO163 Service Manual

6.6

Disassembly and Replacement

[A] Original glass
(1) Remove 2 screws and take off the original
glass holder while sliding it to the right.
(2) Remove 2 screws and take off the original
glass.
Notes:
1. When handling the original glass, take
care not to contaminate the surface with
fingerprints or such.
2. Do not place the original glass directly on
the floor.
3. When installing the original glass, fit 2
guides of the original glass in the groove
of the scanner top cover.
(3) Take off the ADF original glass.
e-STUDIO163/203 SCANNER
Original glass
ADF Original glass
6 - 8
Original glass holder
Fig. 6-6
Fig. 6-7
Fig. 6-8
December 2005 © TOSHIBA TEC