Hitachi IJ RX2 Service Manual page 72

(4) Circulation system control data (SEQUENCE.TXT)
№ Date Start time Finish timeCode
1 2011/7/7 7:05:29
7:06:56
2 2011/7/7
8:06:56
3 2011/7/7
9:07:45
4 2011/7/7
10:12:04
5 2011/7/7
11:37:20
6 2011/7/7
12:07:22
7 2011/7/7
12:14:45
8 2011/7/7
- Code
Refer to the code of above example.
- Sequence name
Refer to the sequence name of above example.
- Result
0: Normal end,
- Aborted step No.
Internal management code
- Info1-Info4
Internal management code
*) In case of change the ambient temperature upper limit on the system environment
screen, the before / after temperature value are indicated as below.
Before change: Info1
After change: Info2
(5) Trace data(TRACE.TXT）
№
Code Sequence name
1 001 Power turned on
time
2 009 CM clock
3 003 Select message
- Code : refer to the next page.
- Sequence name: refer to the next page
- Info1-Info4 : refer to the each Logging contents
[Example]
Sequence name
0:02:09 160 Eject ink B
1:53:16 208 Noclean-stop
0:05:35 80 Nozzle backwash
0:22:42 32 Ink drainage
0:08:47 176 Eject ink A
0:16:57 192 Clean-stop
0:03:51 96 Gutter cleaning
1:00:00 246 Ambient temp. upper lim.
1: Aborted, 2: Abnormal end
[Example]
Date
2014/01/22
2014/01/22
2014/01/22
2-55
Aborted
Result step №
3 0
0 0
3 0
3 0
0 0
0 0
1 2
0 0
Time Information
9:20:00
9:20:00 [CCPU], 2014/01/22, 9:20:10,
[MCPU], 2014/01/22, 9:20:10
9:25:35 0001, normal
info1 info2 info3 info4
0 0 0
0 0 0
0 0 0
0 0 0
0 0 0
0 0 0
0 0 0
40 30 0
0
0
0
0
0
0
0
0