Hitachi IJ RX2 Service Manual page 92

With respect to the setting
of service personnel
mode, refer to "2.1 setting
of maintenance mode by
service personnel".
[Procedure for function addition using upgrade key for RX2-S]
(1) Turn off the power and turn on the power with upgrade key installed on EZJ126.
(2) Input a special password for service maintenance mode on Select login user menu.
(3) Select Upgrade screen on the second page of the service maintenance screen.
(4) Upgrade screen is displayed.
Upgrade function setup
Max Column
Max Character size
Min Character size
Particle use 1 line
2 line
3 line
4 line
5 line
Chimney/DIN print
2D code print
Max registers
Max printing columns
Calendar items
Shift code, Time count
Replacement items
Count items
Number of upgrades available : ８
Number of upgrades used
(5) Steps possible for upgrade is up to 2 steps for 1 key, 5 steps for 2 keys and 8 steps
for 3 keys.
(6) Select the items to upgrade then press OK.
Upgrade function setup
Max Column
Max Character size
Min Character size
Particle use 1 line
2 line
3 line
4 line
5 line
Chimney/DIN print
2D code print
Max registers
Max printing columns
Calendar items
Shift code, Time count
Replacement items
Count items
Number of upgrades available : ０
Number of upgrades used
(7) Exit the maintenance screen then cancel the service personnel password by using
password protection.
[Stop ]
2 line 3 line 4 line
12x16 18x24 24x32
5x5 5x5 4x5
f/2 f/1
f/2 f/1.5
f/2 f/1.66
f/3 f/2
f/3 f/3
supported
NOT supported
supported
NOT supported
48 150
120 240
2 8
supported
NOT supported
48 99
2 8
Upgrade code
: ０
ＱＳ２０２
[Stop ]
2 line 3 line 4 line
12x16 18x24 24x32
5x5 5x5 4x5
f/2 f/1
f/2 f/1.5
f/2 f/1.66
f/3 f/2
f/3 f/3
supported
NOT supported
supported
NOT supported
48 150
120
240
2 8
supported
NOT supported
48 99
2 8
Upgrade code
: ０
ＨＬ４１８
3-17
Warning Com 2015.07.07 12:45
=0
5 line
24x32
4x5
HOME
f/1
f/1
f/1
f/1
f/3
150-2000
1000
Cancel
OK
Warning Com 2015.07.07 12:45
=0
5 line
24x32
4x5
HOME
f/1
f/1
f/1
f/1
f/3
150-2000
1000
Cancel
OK