Rescue Soft - Hitachi IJ RX2 Service Manual

2.21 Rescue soft

- Use this function when the IJ printer does not start up during turn on procedure.
- Use the Rescue soft which is prepared by Hitachi.
- This function will initialize all registered data and settings, ensure reinstall all data and settings with
"Back up" data.
This function will be initialized the settings as below items on the list, ensure reinstall all data and settings
with "Back up" data.
1 Prepare Rescue USB.
1) Rename UXVUP0A22(CJ8reset)_1._ex and UXVUP0A22(CJ8reset)_2._ex
to UXVUP0A22(CJ8reset)_1.exe and UXVUP0A22(CJ8reset)_2.exe
2) Copy the UXVUP0A22(CJ8reset)_1.exe and UXVUP0A22(CJ8reset)_2.exe into same folder.
3) Execute (double click) UXVUP0A22(CJ8reset)_1.exe and UXVUP0A22(CJ8reset)_2.exe for
Create "UXVUP" folder and "cj8resc_rx2".
4) Copy the "UXVUP" folder and "cj8resc_rx2" to the USB root directly.
2 Rescue procedure.
1) Be sure to turn off the power.
2) Insert a rescue memory USB into the slot.
3) Turn on the power.
Download procedure start automatically.
4) Turn off the power when the download is completed.
5) Take the rescue USB from the USB port.
6) Insert a USB with backup data into the USB port.
7) Turn on the power and data copy to the printer.
8) Turn off the printer and take the USB from the USB port.
2 Insert a rescue memory USB into the slot.
[Caution]
● Format the USB with FAT16 or FAT32 by PC when USB memory error occurred.
● Turn off the printer then turn on again when some fault was occurred during rescue procedure or
the rescue process is stopped.
2-57