ABB SM3000 User Manual page 121

Multipoint videographic recorder/paperless recorder
Hide thumbs Also See for SM3000:
Table of Contents

Advertisement

A4.3.2 FTP Access via Internet Explorer
Note. Internet Explorer version 5.5 or later is required
for FTP access via Internet Explorer.
Before data can be accessed via FTP, Internet Explorer must be
configured with the appropriate options.
To ensure that the latest data file is copied, Internet Explorer
must be set to check for newer versions of stored pages on
every visit to a page. If this check is not performed, the browser
may use data stored in the cache of the local PC rather than
retrieve the current data over the network from the remote
device.
1) From the Internet Explorer 'Tools' menu select 'Internet
Options'.
2) In the 'General' tab of the displayed dialog box, click the
Settings button in the 'Temporary Internet Files' grouping.
3) From the options for 'Check for newer versions of stored
pages:', select 'Every visit to the page' and click 'OK'.
To enable FTP access:
1) Select the 'Advanced' tab of the 'Internet Options' dialog
box, ensure that the 'Enable folder view for FTP sites option'
under the 'Browsing' heading is selected and click 'OK'.
Accessing Data via FTP
To access data:
1) Start Internet Explorer.
2) In the 'Address' bar, enter 'ftp://' followed by the IP address
of the recorder from which the files are to be copied. The
following is displayed:
Fig. A4.4 FTP Login
3) Enter the 'User Name:' and 'Password:' for the recorder (see
Section 4.4.5), and click on 'Login'. The contents of the
recorder, that looks similar to the following, is displayed:
Fig. A4.5 The Explorer Workspace
4) Open the folder containing the file to be displayed. The files
within the folder can be displayed in any standard format
(small icon, large icon, list or details) by selecting the
appropriate option from the 'View' menu.
Note. The contents of the Storage_Card folder are
accessible only if archiving is set to 'On-line' in the
recorder's Setup menu – see Section 3.4.
5) Select the file or files to be copied. The 'Shift' and 'Ctrl' keys
can be used to select more than one file.
6) Click the right mouse button to display the following option
menu:
Fig. A4.6 The Option Menu
APPENDIX 4 – ETHERNET...
119

Advertisement

Table of Contents
loading

Table of Contents