ABB SM3000 User Manual page 65

...4.4.2 Security
Enter the number of consecutive incorrect password entries
allowed by a user. If the number of incorrect entries exceeds
this limit, the user's access privileges are de-activated and
can be reinstated only by the System Administrator (User 1).
Passwords have a maximum length of 20 characters. Enter
the minimum length required for all new passwords.
The System Administrator (User 1) can view and/or change
the user name, access privileges and password for any other
user. Select the user to be viewed/edited.
Enter a name for the selected user.
Set access privileges for selected user.
Disabled – The selected user is unable to access
the Configuration and Setup levels or
enter electronic signatures.
Setup – The selected user is able to access the
Setup level.
e-Sign – The selected user is able to enter an
electronic signature.
Config (Full) – The selected user is allowed full
configuration access with the exception
of access to the Audit Log size setting
and the Security Settings.
Note. The System Administrator (User 1) only is able to
change the Audit Log size and the Security Settings.
Config (Ltd) – The selected user is able to:
• Change alarm trip points, hysteresis
and time hysteresis settings.
• Make input adjustments for analog
input boards.
• Load configurations from external
media only.
Config (Load) – The selected user is unable to make any
configuration changes but can load
configurations from external media.
Enter an initial password for the selected user.
Note. The user may subsequently change this password.
4 CONFIGURATION...
63