ABB SM3000 User Manual page 37

...2.9 Alarm Event Log
Configuration
Setup
Filter
Group 1 Alarms
Group 2 Alarms
Group 3 Alarms
Group 4 Alarms
Group 5 Alarms
Group 6 Alarms
Operator Messages
All Data
Active Transitions Only
Alarm Acknowledge
Group 1 Alarms
Group 2 Alarms
Group 3 Alarms
Group 4 Alarms
Group 5 Alarms
Group 6 Alarms
All Groups
ch1.1 Volume
ch1.2 Pressure
ch1.3 In Flow
ch1.4 Volume
ch1.5 Valve
ch1.12
All
Select the Configuration level – see Section 4.
Select the Setup level – see Section 3.
Select the entries to be displayed in the log.  Indicates entries currently displayed.
Notes.
• Hiding and displaying log entries does not affect the recording of events in the log.
• All selected alarm event transitions (from inactive to active, from active to
acknowledged, from acknowledged to inactive, from active to inactive) appear in the
sequence in which they occurred.
• Selecting 'All Data' displays entries for all enabled group alarms and operator messages.
• Selecting 'Active Transitions Only' displays entries for alarms when made active and
hides all acknowledged & inactive transistions.
The alarm event log is not group specific therefore to acknowledge a particular alarm, use
the , and keys to first select the relevant process group followed by the alarm
to be acknowledged from the sub-sub-menu.
To acknowledge all active alarms in all process groups simultaneously, select 'All Groups'
and press the key.
To acknowledge all active alarms in the selected process group simultaneously, select 'All'
and press the
key.
Note. If an alarm in
another
continues to be displayed in the status bar. If an active alarm in
unacknowledged, the icon is surrounded by a red flashing border.
The short channel tags of individual alarms that have not been configured are greyed-out
in the menu.
process group is active, the Global Alarm status icon (
2 OPERATION...
)
process group is
another
35