ABB SM3000 User Manual page 127

...A4.4 Using the Recorder's Web Server – Figs A4.8 to A4.18
Enter a valid FTP username –
see Section 4.4.5
Enter an associated FTP password –
see Section 4.4.5
Enter an Operator Message to be sent to
the recorder (maximum 20 characters)
Enter an Instruction to be sent to the Operator
(maximum 160 characters)
Assign an Operator Message to a specific
group or groups
Click on button to send the Message or
An Operator Message is stored in the
recorder's alarm event log and if
enabled (see Section 4.5.2), it is displayed
in the chart view (see Section 2.3)
An Instruction is displayed in a message box
on the recorder's screen until the Operator
acknowledges it by pressing the
Instrument identification
Software revision and options
Hardware fitted
OR
Instruction.
key
Fig. A4.16 Operator Message Page
Fig. A4.17 Service Information Page
APPENDIX 4 – ETHERNET...
125