ABB SM3000 User Manual page 18

...2 OPERATION
...2.3 Chart Views
Totalizer Stop/Go
ch1.1 Volume
ch1.2 Pressure
ch1.3 In Flow
A: Total Flow 1.3A
ch1.4 Volume
B: Total Flow 1.3B  Stop
ch1.5 Valve
ch1.12 Go
All
Totalizer Reset
ch1.1 Volume
ch1.2 Pressure
ch1.3 In Flow
A: Total Flow 1.3A
ch1.4 Volume
B: Total Flow 1.3B
ch1.5 Valve
ch1.12
All
Alarm Acknowledge
ch1.1 Volume
ch1.2 Pressure
ch1.3 In Flow
ch1.4 Volume
ch1.5 Valve
ch1.6 Valve
ch1.12
All Group 1
AutoView Scroll
New Chart
16
Note. Applicable only to Circular Chart view.
Stop and start individual totalizers.
Channel totalizers that have not been enabled in the Configuration level are greyed-out.
Note. When a totalizer is not running (i.e. 'Stop' is selected), the corresponding totalizer
value is shown in red.
Note. Applicable only to Circular Chart view.
Reset the totalizer value to the totalizer preset value.
Channel totalizers that have not been enabled in the Configuration level are greyed-out.
To acknowledge a particular alarm, use the
press the key.
Note. Active unacknowledged alarms in the current process group are identified by a red
border around the value in the associated channel indicator, alternating with a red Alarm
Event icon in the bottom left hand corner of the same indicator. Active acknowledged
alarms are identified by a continuous red Alarm Event icon in the bottom left hand corner
of the indicator – see Fig. 2.3, page 7.
To acknowledge all active alarms in the current process group simultaneously, select
'All Group (X)' and press the
Note. If an alarm in
another
continues to be displayed in the status bar. If an active alarm in
unacknowledged, the icon is surrounded by a red flashing border.
The short channel tags of individual alarms that have not been configured are greyed-out
in the menu.
Select 'AutoView Scroll' to display the chart for each configured process group in turn for
40 seconds. The AutoView Scroll status icon (
AutoView Scroll is active. Press any key to cancel AutoView Scroll.
Note. Applicable only to Circular Chart view.
Select to start a new circular chart.
and keys to highlight it in the menu and
key.
process group is active, the Global Alarm status icon (
) is displayed in the status bar when
)
process group is
another