Common Configuration; Setup - ABB SM3000 User Manual

...4 CONFIGURATION

4.4 Common Configuration

4.4.1 Setup

No. of No. of Channels
Groups per Group
1 12
2 12
3 12
4 9
58
Fig. 4.8 Selecting Common Configuration
Channel IDs Total No. of
Channels
Ch1.1 to Ch1.12
Ch1.1 to Ch1.12
Ch2.1 to Ch2.12
Ch1.1 to Ch1.12
Ch2.1 to Ch2.12
Ch3.1 to Ch3.12
Ch1.1 to Ch1.9
Ch2.1 to Ch2.9
Ch3.1 to Ch3.9
Ch4.1 to Ch4.9
Table 4.2 Channels and Groups
Configuration type is fixed as 'Basic'.
Enter the number of process groups required.
The number of channels assigned to each process group is
dependent upon the number of groups selected – see
Table 4.2 below.
Note. If the 'Number of groups' setting is increased, the
channel source IDs of all new channels are set to 'None' and
their alarms and totalizers are set to 'Off'.
No. of No. of Channels
Groups per Group
12 5
24
36
6
36
Channel IDs
7 Ch1.1 to Ch1.7
Ch2.1 to Ch2.7
Ch3.1 to Ch3.7
Ch4.1 to Ch4.7
Ch5.1 to Ch5.7
6 Ch1.1 to Ch1.6
Ch2.1 to Ch2.6
Ch3.1 to Ch3.6
Ch4.1 to Ch4.6
Ch5.1 to Ch5.6
Ch6.1 to Ch6.6
Total No. of
Channels
35
6