ABB SM3000 User Manual page 124

...APPENDIX 4 – ETHERNET
...A4.4 Using the Recorder's Web Server – Figs A4.8 to A4.18
Channel tags
If enabled, the
values are updated
automatically
every 10 seconds
Enabled recording
channels
(the color coding
is the same as
the standard trace
colors used on
the recorder)
Note. Alarm acknowledgement is enabled only if a user has been configured for
remote operation access – see Section 4.4.5.
Alarm tag
Alarm type
Configured
alarms,
color coded
for each
channel
122
Latest value of channel
and units of measure
Fig. A4.10 Recording Channels Page
Fig. A4.11 Alarms Page
Alarm status of each channel – refer to rear foldout
for identification of alarm icons
Primary and
secondary
sample rates
set in
Configuration
Current status
of recording
Alarm
acknowledgement
status
Click to
acknowledge
alarm (a warning
message is
displayed if not
logged on) – see
below
Note
Current alarm
status
Alarm trip
value and
units of
measure