ABB SM3000 User Manual page 14

...2 OPERATION
...2.3 Chart Views
Operator Messages
1 - 6 No message
7 - 12 No message
13 - 18 No message
19 - 24 No message
<user defined> No message
No message
12
Add one of 24 predefined Operator Messages (see Section 4.4.4) or one User-Defined
Message to the alarm event log.
If '<user defined>' is selected, a data entry keyboard first appears to enable the message
to be entered (see Fig. 4.5, page 53).
An 'Assign to group' dialog box then appears to enable the message to be assigned to one
or more Process Groups.
The selected or user-defined message is displayed briefly in the status bar. If Operator
Message annotation is selected (see Chart Annotation on next page) the message is also
added to the chart.
Note. When the instrument is in Historical Review mode, Operator Messages generated
are added at the current time, not the time indicated by the cursor.