ABB SM3000 User Manual page 26

...2 OPERATION
...2.5 Digital Indicator View
Channel Select
Channel Select
Show All Channels for Group 1
Show All Configured Channels
Channel Select
Show All Channels for Group 1
Show All Configured Channels
Totalizer Stop/Go
ch1.1 Volume
ch1.2 Pressure
ch1.3 In Flow
A: Total Flow 1.3A
ch1.4 Volume
B: Total Flow 1.3B
ch1.5 Valve
ch1.12
All
Totalizer Reset
ch1.1 Volume
ch1.2 Pressure
ch1.3 In Flow
A: Total Flow 1.3A
ch1.4 Volume
B: Total Flow 1.3B
ch1.5 Valve
ch1.12
All
Alarm Acknowledge
ch1.1 Volume
ch1.2 Pressure
ch1.3 In Flow
ch1.4 Volume
ch1.5 Valve
ch1.12
All Group 1
AutoView Scroll
24
Display all configured channel indicators for the process group currently selected for
display.
Display all configured channel indicators for all process groups.
Note. Selecting this option enables up to 36 channels to be displayed if all 36 channels
are configured.
Stop and start individual totalizers.
Channel totalizers that have not been enabled in the Configuration level are greyed-out.
Notes.
• When a totalizer is not running (i.e. 'Stop' is selected), the corresponding totalizer value
 Stop
is shown in red.
Go
• When 'Show All Configured Channels' is selected above, this menu changes to show
Group followed by Channel followed by Totalizer.
Reset the totalizer value to the totalizer preset value.
Channel totalizers that have not been enabled in the Configuration level are greyed-out.
Note. When 'Show All Configured Channels' is selected above, this menu changes to
show Group followed by Channel followed by Totalizer.
To acknowledge a particular alarm, use the
press the
Notes.
• Active unacknowledged alarms in the current process group are identified by a red
border around the value in the associated channel indicator, alternating with a red Alarm
Event icon in the bottom left hand corner of the same indicator. Active acknowledged
alarms are identified by a continuous red Alarm Event icon in the bottom left hand corner
of the indicator – see Fig. 2.7, page 21.
• When 'Show All Configured Channels' is selected above, this menu changes to show
Group followed by Channel.
To acknowledge all active alarms in the current process group simultaneously, select 'All'
and press the
Note. If an alarm in
continues to be displayed in the status bar. If an active alarm in
unacknowledged, the icon is surrounded by a red flashing border.
The short channel tags of individual alarms that have not been configured are greyed-out
in the menu.
Select 'AutoView Scroll' to display the chart for each configured process group in turn for
40 seconds. The AutoView Scroll icon (
Scroll is active. Press any key to cancel AutoView Scroll.
key.
key.
process group is active, the Global Alarm status icon (
another
and keys to highlight it in the menu and
another
) is displayed in the status bar when AutoView
)
process group is