A4.4 Using The Recorder's Web Server - ABB SM3000 User Manual

A4.4 Using the Recorder's Web Server – Figs A4.8 to A4.18
Figs. A4.8 to A4.18 are examples of the page views available from the recorder's web server.
Recorder's
IP address
Instrument tag
Menu buttons to
display recorder's
current data and
states
Change
configuration
(a warning
message is
displayed if not
logged on) – see
below
Note 1
Notes.
1. The 'Log On' and 'Configuration' buttons are displayed only if a user has been configured for remote
operation access – see Section 4.4.5.
2. The Current Display view is not available if the recorder is in historical review or configuration mode.
Select the required view from
the drop-down box list.
The recorder's display
changes to the view selected
If enabled, the screen image updates every 10 seconds
Fig. A4.8 Home Page
Fig. A4.9 Current Display
APPENDIX 4 – ETHERNET...
Click to log on to the
recorder to enable
configuration access
– see
Click on the relevant
hyperlink to display
the entire log in the
browser window
Click on the picture
of the recorder to
open the current
display on the
recorder's screen
in a new window –
see
Fig. A4.9
Language selection
for web pages
Click to print the current display
below
Note 1
below and
Note 2
121