Mitsubishi Electric GOT2000 Series Connection Manual page 109


GOT Ethernet setting
Item Description
GOT Set the IP address of the GOT.
IP Address (Default: 192.168.0.18)
Set the subnet mask for the sub
network.(Only for connection via
Subnet router)
Mask If the sub network is not used, the
default value is set.
(Default: 255.255.255.0)
Set the router address of the
default gateway where the GOT is
Default
connected.(Only for connection via
Gateway
router)
(Default: 0.0.0.0)
Peripheral S/W
Set the GOT port No. for the S/W
Communication
communication. (Default: 5015)
Port No.
Set the GOT port No. for the
Transparent Port
transparent function.
No.
(Default: 5014)

Ethernet setting
Range
Item
0.0.0.0 to
255.255.255.255
Host
Net No.
0.0.0.0 to
255.255.255.255
*2
Station
Type
0.0.0.0 to
255.255.255.255
IP address
1024 to 5010
5014 to 65534
Port No.
(Except for 5011,
5012, 5013 and
Communication
49153)
format
1024 to 5010
5014 to 65534
(Except for 5011,
5012, 5013 and
49153)
Description
The host is displayed. (The host is
indicated with an asterisk (*).)
Set the network No. of the
connected Ethernet module.
(Default: blank)
Set the station No. of the
connected Ethernet module.
(Default: blank)
FUJI (fixed)
Set the IP address of the
*1
connected Ethernet module.
(Default: 192.168.0.1
Set the port No. of the connected
Ethernet module.
(Default: 507)
TCP (fixed)
*1 Connection with the PLC is unavailable if the IP address is
the default value. Set the value to the IP address of the PLC
to be connected.
*2 Each of [GOT Station] set in the communication detail setting
and [Station] set in the Ethernet setting must be set to
different station numbers.
■
Communication detail settings
4. CONNECTION TO FUJI PLC
4.3 Ethernet Connection
4
Set value
―
1 to 239
1 to 254
FUJI (fixed)
PLC side IP
address
251 to 65531
TCP (fixed)
4 - 25