Device Range That Can Be Set - Mitsubishi Electric GOT2000 Series Connection Manual

13.6 DEVICE RANGE THAT CAN BE SET

The device ranges of controller that can be used for GOT
are as follows.
Note that the device ranges in the following tables are the
maximum values that can be set in GT Designer3.
The device specifications of controllers may differ
depending on the models, even though belonging to the
same series.
Please make the setting according to the specifications of
the controller actually used.
When a non-existent device or a device number outside
the range is set, other objects with correct device settings
may not be monitored.

Setting item
Item
Set the device name, device number, and bit number.
Device The bit number can be set only by specifying the bit of
word device.
Displays the device type and setting range which are
Information
selected in [Device].
Set the monitor target of the set device.
Network
Station Select this item when monitoring the PLC of
No. the Station No. (1 to 247) specified.

Device Range
Device name
Input (IX) IX0.0 to IX255.7
Output (QX) QX0.0 to QX255.7
Marker BOOL (MX) MX0.0 to MX8191.7
Input (IW)
Output (QW) QW0 to QW254
Marker (MW) MW0 to MW32254
*1
SW0 to SW468
System Word (SW)
*1 Some System Word devices are read-only.
For details, refer to the following.
MITSUBISHI INDIA PLC user's Manual
Description
Setting range Device No.
available representation
Decimal + Octal
W0 to IW254
Hexadecimal
13. CONNECTION TO MITSUBISHI INDIA PLC
13.6 DEVICE RANGE THAT CAN BE SET
13
13 - 13