Got Side Settings - Mitsubishi Electric GOT2000 Series Connection Manual

10.2.5 GOT Side Settings


Setting communication interface
(Communication settings)
Set the channel of the connected equipment.
2.
1.
Select [Common] [Controller Setting] from the
menu.
2.
The Controller Setting window is displayed. Select the
channel to be used from the list menu.
3.
Set the following items.
• Manufacturer: AB
• Controller Type: Set either of the followings.
AB SLC500
AB MicroLogix
AB Control/CompactLogix
• I/F: Interface to be used
• Driver: Set either of the followings.
AB SLC500, AB 1:N
AB MicroLogix
AB Control/CompactLogix
4.
The detailed setting is displayed after Manufacturer,
Controller Type, I/F, and Driver are set.
Make the settings according to the usage
environment.
10.2.5 ■ Communication detail settings
Click the [OK] button when settings are completed.
POINT POINT POINT
The settings of connecting equipment can be
confirmed in [I/F Communication Setting].
For details, refer to the following.
1.1.2 I/F communication setting

(1) AB SLC500
3.
4.
Transmission
Speed
Adapter Address
Click!
Host Address
(2) AB MicroLogix
Transmission
Speed
Sum Check Type
Adapter Address
Host Address
10. CONNECTION TO ALLEN-BRADLEY PLC
Communication detail settings
AB 1: Ns
,
Item Description
Set this item when change the
transmission speed used for
communication with the connected
equipment.
(Default: 19200bps)
Specify the adapter address (station
No. of the PLC that the GOT will
*1
monitor) in the connected network.
(Default: 0)
Specify the host address (station No.
of the adapter to which the GOT is
*1
connected) in the connected network.
(Default: 1)
*1 Do not specify the same value for the adapter address and
host address.
Item Description
Set this item when change the
transmission speed used for
communication with the connected
equipment.
(Default: 19200bps)
Specify the format in which the sum
check is performed during
communication when performing sum
check.
(Default: BCC)
Specify the adapter address (station
No. of the PLC that the GOT will
*1
monitor) in the connected network.
(Default: 0)
Specify the host address (station No.
of the adapter to which the GOT is
*1
connected) in the connected network.
(Default: 1)
*1 Do not specify the same value for the adapter address and
host address.
10.2 Serial Connection
Range
4800bps,
9600bps,
19200bps
0 to 31
1 to 31
10
Range
4800bps,
9600bps,
19200bps,
38400bps
BCC, CRC16
0 to 63
0 to 63
10 - 11