Plc Side Setting (Mp3000 Series) - Mitsubishi Electric GOT2000 Series Connection Manual

6.3.7 PLC side setting (MP3000
series)
POINT POINT POINT
YASKAWA PLC
For details of YASKAWA PLCs, refer to the following
manuals.
YASKAWA PLC user's Manual

Parameter settings
Make the parameter settings with a peripheral tool.
(1) Settings for the built-in MP3000 series Ethernet
Item
IP Address
Subnet Mask
Transmission
Gateway IP
parameter
Address
setting
Device name
Engineering Port
Transmission
parameter
Response Time
detailed setting
Count of Retry
Connection
Number
Local Port
Node IP
*1
Address
*1
Node Port
Connection Type
Message
communication
of connection
parameter
Protocol Type
setting
Code
Detail
Node Name
*1 Set the same the Node IP Address (Remote Station's IP
Address) and the Node Port (Remote Station's Port Number)
as the Local IP Address and the Local Port (Local Station's
Port Number) on the GOT side.
For the Local IP Address and the Local Port (Local Station's
Port Number) on the GOT side, refer to the following.
6.3.4 ■ Ethernet setting
6 - 32
6. CONNECTION TO YASKAWA PLC
6.3 Ethernet Connection
Set value Range
[ ].[ ].[ ].[ ] PLC side IP address
[ ].[ ].[ ].[ ]
PLC side setting
[ ].[ ].[ ].[ ]
Up to 16 one-byte
Arbitrary
characters
For a connection with
256 to 65535
software MPE720
0 Not required for
communication with
0
GOT
1 Range: 1 to 20
10500 256 to 65534
[ ].[ ].[ ].[ ] IP address of GOT
[ ] Port No. of GOT
UDP
TCP/UDP
(recommended)
Extended
MEMOBUS,
Extended
MEMOBUS,
MEMOBUS
MELSEC, None,
MODBUS/TCP
BIN RTU, BIN, ACII
(a) Auto receive function
Up to 32 one-byte
characters
Arbitrary
(16 two-byte
characters)
(a) Auto receive function
Set the following items.
Item
<When auto receive function>
Valid
Auto receive <When using ladder program to receive
messages>
Invalid
Transmission
Set as necessary
buffer channel
Setting the
slave I/F
register
Set value Range
Valid / Invalid
1 to 10
Default -