NEC Univerge SV8100 System Hardware Manual page 110

Issue 1.0
3 - 50
3. Remove fan access panel from rear of CHS2U chassis. Refer
to Figure 3-67 Removing Fan Access
Figure 3-67 Removing Fan Access Panel
4. Connect one end of Battery Connection Cable to Battery
Connector on rear of Basic and Expansion chassis.
Figure 3-68 Connecting External Battery to CHS2U
5. Connect other end of cable to Battery Connector on rear of
CHS LARGE BATT BOX chassis. Refer to
CHS LARGE BATT BOX Connection
LARGE BATT BOX
Panel.
or Figure 3-70 Dual CHS
Connection.
Installing the SV8100 Chassis
UNIVERGE SV8100
Figure 3-69 Single