Install Ac Power Cords On Multiple-Chassis (Optional); Install Additional Blades; Apply Power To The 19" Chassis - NEC Univerge SV8100 System Hardware Manual

Issue 1.0
3 - 36
2.5.8

Install AC Power Cords on Multiple-Chassis (Optional)

1. Locate the supplied AC power cords and attach to the AC Inlets
located on the back of the Controlling and Expansion Chassis.
Figure 3-46 Install 19" AC Power Cords (Multiple-Chassis)
2.5.9

Install Additional Blades

Refer to Chapter 5,
4-3.
2.5.10

Apply Power to the 19" Chassis

Refer to Chapter 5,
2.1 Installation and Safety Precautions on page
2.6 Powering Up the SV8100 on page
Installing the SV8100 Chassis
UNIVERGE SV8100
AC Power
Cords to
AC Inlets
4-8.