Night Mode Selection; Night Mode Selector Switch; Connecting A Night Mode Selector Switch; Section 10 Telephone Labeling - NEC Univerge SV8100 System Hardware Manual

UNIVERGE SV8100
N
S 9
IGHT
ECTION
9.1
9.2
T
S 10
ELEPHONE
ECTION
10.1
System Hardware Manual
M S
ODE ELECTION

Night Mode Selector Switch

The Night Mode Switch relay closes when the system detects either an open
or closure on the MISC block NIGHT SW terminals. Maximum 48v DC is
output to the switch when open, and 7mA DC when shorted.

Connecting a Night Mode Selector Switch

1. Connect an RJ-61 modular line cord from the CN17 connector on the
CD-CP00 to the appropriate location on the extension cross-connect
block.
2. Connect the two-conductor station cable from the cross-connect block to
the night switch mechanism output leads.
3. Install bridging clips as required.
L
ABELING

DESI Printer Sheets

Telephones can be easily labeled by removing the plastic faceplate. These
labels can be printed by hand, typewriter, or printing DESI labels. Labels for
this are on 8 1/2 x 11" paper, which allows for easy printing by any printer – dot
matrix, laser, etc.
DESI Printer Sheets are available for the following:
Economy 2E – DESI ITL/DTL-2E (25 PKG)
Economy 6DE – DESI ITL/DTL-6DE (25 PKG)
All Value Telephones – DESI ITL/DTL-12D/24D (25 PKG)
8LK – DESI ITL/DTL 8LK (25 PKG)
60 DSS – DESI DCL-60 (25 PKG)
Clear Side Panel – DESI ITL/DTL-SIDE (25 PKG)
LCD Value, Clear Side – DESI ITL/DTL-SIDE-LCDV (25 PKG)
Issue 1.0
6 - 27