Applying Power To The Dt700 Multiline Terminals - NEC Univerge SV8100 System Hardware Manual

UNIVERGE SV8100
4.2
System Hardware Manual
2. Lead the Line and Handset cables through the applicable grooves.
Figure 5-18 Leading Line Cords on a Multiline Terminal

Applying Power to the DT700 Multiline Terminals

The DT700 terminals support two different methods to power the terminal:
AC-2R/AC-3R
Plug the optional AC-2R/AC-3R AC Adapter input Jack in the terminal
base unit, and plug the wall plug of the AC Adapter in a standard 230
Vac wall outlet.
In-Line Power/PoE (Power over Ethernet)
In-Line Power (sometimes called Power Over Ethernet) is a LAN
technology that allows standard 10 Base-T/100 Base-TX data cables to
pass electrical current from a power source to a requesting end device.
Groove for Line and Handset Cables
Issue 1.0
5 - 23