DBS3900(ICR)
Installation Guide
l
Issue 01 (2011-03-30)
Figure 15-26 Connections of the PGND cables for the DC RRU
4.
Route cables by referring to
5.
Use cable ties to bind cables.
6.
Label the installed cables by referring to Attaching a Sign Plate Label.
Installing the PGND cable for the AC RRU
1.
Prepare the PGND cable.
(1) Cut the cables to proper lengths based on the actual cable route.
(2) Add OT terminals to both ends of the cable.
2.
Connect one end of the PGND cable to the RRU.
3.
Connect the other end to the ground bar on the IFS06.
NOTE
When installing the PGND cable, keep the crimping tube of the OT terminal in the correct
direction.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
15.1 Cabling
Requirements.
15 Installing Cables
15-49