DBS3900(ICR)
Installation Guide
18
Installing the Cover Plate for the IMB03
This section describes the procedure for installing the cover plate for the IMB03.
Procedure
Step 1 Fit the tabs on the cover plate into the slots in the IMB03, as shown in
Figure 18-1 Installing the cover plate
Step 2 Tighten the M3×8 bolt on the left of the cover plate for the IMB03 until the tightening torque
reaches 0.3 N·m using a Phillips torque screwdriver, as shown in
Issue 01 (2011-03-30)
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
18 Installing the Cover Plate for the IMB03
Figure
Figure
18-2.
18-1.
18-1