Installing Cables - Huawei DBS3900 Installation Manual

DBS3900(ICR)
Installation Guide
About This Chapter
This chapter describes the procedure for installing all the cables.
15.1 Cabling Requirements
Route cables according to the specified cabling requirements to prevent signal interference.
15.2 Cable Connections
This section describes the cable connections in different scenarios.
15.3 Cable Installation Process
This section describes the process of installing the ICR-related cables.
15.4 Cable Routes
This section describes the cable routes.
15.5 Installing the PGND Cable for the RRU
This section describes the procedure for installing the PGND cable for the RRU.
15.6 Installing the Power Cable for the BBU
This section describes the installation of the power cable for the BBU.
15.7 Installing the Input Power Cable
This section describes the installation of the input power cable.
15.8 (Optional) Installing the Power Cable and Monitoring Signal Cable for the DCDU
This section describes the procedure for installing the power cable and monitoring signal cable.
15.9 Installing the Power Cable for the RRU
This section describes the installation of the power cable for the RRU.
15.10 Installing the E1/T1 Cable (FE/GE Cable or FE/GE Optical Cable)
This section describes the installation of the E1/T1 cable, FE/GE cable, and FE/GE optical cable.
The FE/GE cable and FE/GE optical cable are optional. The following description is based on
the installation of the E1/T1 cable.
15.11 Installing the CPRI Optical Cable
This section describes the procedure for installing the CPRI optical cable.
15.12 Installing the Antenna Jumper for the RRU
Issue 01 (2011-03-30)
15
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.

15 Installing Cables

Installing Cables
15-1