Planetary Gear Operation Check; Planetary Gear Disassembly And Reassembly - Suzuki Liana RH418 Supplementary Service Manual

5A-102 Automatic Transmission/Transaxle:

Planetary Gear Operation Check

One-way clutches
1) Install forward clutch assembly and overdrive / coast
clutch assembly to transaxle rear cover.
2) Install rear planetary ring gear assembly to overdrive
and coast clutch assembly.
3) Make sure that one-way clutch No.0 turns freely
when turned clockwise [A] and locks when turned
counterclockwise [B].
4) Make sure that one-way clutch No.1 turns freely
when turned counterclockwise [A] and locks when
turned clockwise [B].

Planetary Gear Disassembly and Reassembly

S3RH0B5106039
Disassembly
Planetary gear assembly
1) Remove the following parts by removing snap ring
(1).
• Overdrive clutch hub (2)
• Planetary pinion gear assembly (3)
• Two thrust bearing races (4)
I2RH01510165-01
2) Pull out carrier front thrust roller bearing (1).
Carrier front thrust roller bearing dimension
Outside diameter: 83.5 mm (3.29 in.)
Inside diameter: 68.1 mm (2.68 in.)
Thickness: 2.7 mm (0.11 in.)
I2RH01510166-01
3) Remove one-way clutch No.1 (1) by removing snap
ring (2).
S3RH0B5106040
I2RH01510167-01
I2RH01510168-01
I2RH01510169-01