5A-118 Automatic Transmission/Transaxle:
Differential Components
1. Differential gear assembly
2. Bolt
3. Final gear
4. Ring gear set bolt lock plate
Differential Removal and Installation
Removal
Final gear
1) Unclamp 4 final gear set bolt lock plates (2).
2) Remove 8 bolts and 4 final gear set bolt lock plates
(2).
NOTE
Don't reuse lock plates.
3) Remove final gear (1).
5. Differential side bearing outer race
6. Differential side bearing shim
7. Oil seal: Apply grease 99000-25030 to oil
seal lip.
: Apply automatic transaxle fluid.
Bearing outer race
S3RH0B5106055
1) Remove differential side oil seal.
NOTE
Don't reuse removed side oil seal.
2) Drive out taper roller bearing outer race and shim
from transaxle case by using special tools or like.
Special tool
(A): 09924-74510
(B): 09924-74590
(C): 09924-84510-005
I2RH01510218-01
S3RH0B5106054
I2RH01510217-01
: Tightening torque
: Do not reuse.
I2RH01510219-01