Transaxle Housing Inspection; Transaxle Case Removal And Installation; Automatic Transaxle Unit Assembly - Suzuki Liana RH418 Supplementary Service Manual

5A-122 Automatic Transmission/Transaxle:

Transaxle Housing Inspection

Check pan for particles. Remove magnets and use them
to collect any chips.
Inspect oil reservoir plate for any chips and particle
collected on magnet.
Inspect them carefully to find out the type of wear on
transaxle.
• Steel (magnetic)............ Wear of bearing, gear and
plate
• Brass (nonmagnetic)..... Wear of bush

Transaxle Case Removal and Installation

Removal
1) Remove counter shaft LH cylindrical roller bearing
(1), using special tools.
Special tool
(A): 09942-15511
(B): 09941-54911
(C): 09921-26010
NOTE
Never reuse removed cylindrical roller
bearing.
Installation
S3RH0B5106058
1) Apply A/T fluid to outer surface of cylindrical roller
bearing.
2) Tap cylindrical roller bearing, using special tools.
Special tool
(A): 09924-74510
(B): 09944-88210
I2RH01510230-01

Automatic Transaxle Unit Assembly

1) Apply lithium grease to new oil seal lip.
S3RH0B5106059
: Grease 99000–25030
2) Install new oil seal to transaxle case.
3) Insert manual valve lever shaft (1) to transaxle case.
4) Install new spacer (3) and manual valve lever (2) to
manual valve lever shaft (1).
5) Install new slotted spring pin (4).
I2RH01510231-01
I2RH01510232-01
S3RH0B5106060
I2RH01510233-01