Philips IntelliVue TRx Instructions For Use Manual page 22

Transceiver Use with Other Equipment
Patient
Bedside
Monitors
M2601B
Transmitters
1-10
Introducing IntelliVue Telemetry
Remote control of monitoring parameters such as NBP, SpO
and Relearn, as well as limited overview of waves and data are supported
through Patient Bedside Monitors equipped with a bi-directional radio interface.
Please refer to the Instructions for Use for the specific Patient Monitor for
operating information.
Patient Data can be sourced directly from the transceiver to the M8105 MP5
Patient Monitor. The connection is made through a monitor interface cable
inserted in the Telemon/Service Port and connected to the MP5. Please refer to
the MP5 Instructions for Use for additional information.
If your hospital uses TRx and/or TRx
you can distinguish between them by:
• Name on the front of the device (TRx or M2601B)
• Label color (light gray for transceivers, dark gray for transmitters)
+
Transceivers and M2601B Transmitters,
, Alarm Suspend,
2