Huawei LampSite Installation Manual page 100

LampSite
Installation Guide
Figure 6-6 Installing the pRRU housing
Step 9 Power on the pRRU.
Step 10 Instruct the network operator to unblock the pRRU.
l On the UMTS side, log in to the NodeB LMT and run the UBL BRD command to unblock
l On the LTE side, log in to the eNodeB LMT and run the UBL BRD command to unblock
Step 11 Take off the ESD gloves and pack up all the tools.
----End
Issue 02 (2014-05-27)
NOTE
The Phillips screw is the one removed and kept in
the RF daughter board of the pRRU.
the RF daughter board of the pRRU.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
Step 4.
6 Appendix
95