Prru Installed On A Pole - Huawei LampSite Installation Manual

LampSite
Installation Guide
Step 5 Fit the four hooks of the pRRU into the installation kits, as shown in
are properly installed, a slight clack can be heard.
Figure 5-15 Installing a pRRU
----End

5.4.4 pRRU Installed on a Pole

A pRRU can be installed on a metal pole indoors.
Procedure
Step 1 Determine the position for installing the pRRU based on the construction blueprint and the space
requirements.
Step 2 If the diameter of the pole ranges from 30 mm to 70 mm, use the delivered V clamp, installation
plate, and bolts to install the pRRU on the pole. Lead the M6x80 bolt through the plate, and
tighten the bolt to a torque of 5 N•m, as shown in
Issue 02 (2014-05-27)
NOTE
It is recommended that you observe the installation from one side of the pRRU when inserting hooks into
the kits.
NOTE
For pRRU installation space requirements, see
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
5.1.3 Space Requirements.
Figure 5-16.
5 Installing a pRRU
Figure 5-15. If the hooks
63