Installing An Rhub On A Wall - Huawei LampSite Installation Manual

LampSite
Installation Guide
----End

4.3.3 Installing an RHUB on a Wall

An RHUB can be installed on a wall.
Procedure
Step 1 The mounting ears are installed in reverse mode by default. Before installing an RHUB on a
wall, modify the installation mode of the mounting ears on the RHUB.
l Use a torque screwdriver or Phillips screwdriver to remove the mounting ears on both sides
Issue 02 (2014-05-27)
Figure 4-21 Tightening screws
of the RHUB by removing the four M4×8 screws, as shown in
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
4 Installing an RHUB
Figure 4-22.
24