Installing An Rhub In A 19-Inch Shelf - Huawei LampSite Installation Manual

LampSite
Installation Guide
----End

4.3.2 Installing an RHUB in a 19-Inch Shelf

If a shelf houses more than one RHUB, 1 U space is required between two RHUBs. The PSU
must be installed at the bottom of the cabinet.
Procedure
l
Issue 02 (2014-05-27)
Figure 4-16 Pushing an RHUB into a cabinet
4. Use a torque screwdriver or Phillips screwdriver to tighten the four M6×16 screws
with a torque of 2 N•m, as shown in
Figure 4-17 Tightening screws
The following describes how to install an RHUB with mounting ears installed in reverse
mode:
NOTE
If necessary, request one more person for assistance.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
Figure 4-17.
4 Installing an RHUB
21