Huawei LampSite Installation Manual page 54

LampSite
Installation Guide
Installation
Mode
Installing the
pRRU on a
ceiling using a
V clamp
through an
attachment
plate
For details, see
5.4.5 pRRU
Installed on a
Plate.
Installing the
pRRU on a
pole
For details, see
5.4.4 pRRU
Installed on a
Pole.
Installing the
pRRU on a
keel
For details, see
5.4.6 pRRU
Installed on a
Keel.
Installing the pRRU on a pole
When a pRRU is installed on a pole, installation modes vary with the diameter of the pole, as
shown in
Issue 02 (2014-05-27)
Requirements
l The ceiling, such
as a concrete
ceiling, can bear a
load at least four
times the weight
of the pRRU.
l The thickness of
the ceiling is less
than the bolt
length (80 mm).
A pole under the
ceiling can bear a
load at least four
times the weight of
the pRRU.
A keel under the
ceiling can bear a
load at least four
times the weight of
the pRRU.
Table 5-4.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
Mounting Brackets
1. Plate
2. V clamp
3. Bolt (M6X80)
For details, see Table
5-4.
For details, see Table
5-5.
5 Installing a pRRU
Installation
Diagram
For details, see Table
5-4.
For details, see Table
5-5.
49