Prru Installed On A Plate - Huawei LampSite Installation Manual

LampSite
Installation Guide
Step 3 Fit the four hooks of the pRRU into the installation kits, as shown in
are properly installed, a slight clack can be heard.
Figure 5-18 Installing a pRRU
----End

5.4.5 pRRU Installed on a Plate

If the plate on the ceiling has sufficient load bearing capacity and space installation, the pRRU
can be installed on the plate of the ceiling indoors.
Procedure
Step 1 Determine the position for installing the pRRU based on the construction blueprint and the space
requirements.
Step 2 Place the plate in the installation position against the wall. Then, level the plate and mark the
two anchor points using a marker, as shown in
Issue 02 (2014-05-27)
NOTE
It is recommended that you observe the installation from one side of the pRRU when inserting hooks into
the kits.
NOTE
For pRRU installation space requirements, see
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
5.1.3 Space Requirements.
Figure 5-19.
5 Installing a pRRU
Figure 5-18. If the hooks
65