Chapter 5 Adding a Connecting Device
5.2 Connection Procedure When Adding an ETERNUS DX/AF
2
Connect the ETERNUS DX/AF storage systems to the power synchronized unit.
An example of a connection between ETERNUS DX/AF storage systems and a power synchronized unit is
shown below.
For details about how to connect an ETERNUS DX/AF to the power synchronized unit, refer to
Connecting to the ETERNUS DX/AF" (page
Power synchronized unit
Power synchronization starts when the connection is complete. Check that power synchronization performs
normally.
FUJITSU Storage ETERNUS DX, ETERNUS AF Configuration Guide (Power Synchronized Unit)
61).
UPS unit for
Server#0
PWC#0 PWC#1 PWC#2 PWC#3
RS232C cable
(provided with a
power synchronized unit)
RS232C cables
(optional)
68
Copyright 2017 FUJITSU LIMITED
Server#0
Server#1
ETERNUS DX/AF #0
PWC
Added ETERNUS DX/AF
ETERNUS DX/AF #1
PWC
Added ETERNUS DX/AF
ETERNUS DX/AF #2
PWC
Added ETERNUS DX/AF
ETERNUS DX/AF #3
PWC
"4.5
UPS unit for
Server#1
End of procedure
P3AM-8012-10ENZ0