Safety Precautions - Fujitsu ETERNUS DX60 S4 Configuration Manual

This section describes safety precautions.
Make sure to follow the instructions described below to ensure the safe use of the power synchronized unit.
■ If you detect an unusual occurrence during operation
WARNING
FUJITSU Storage ETERNUS DX, ETERNUS AF Configuration Guide (Power Synchronized Unit)
Do Not
• If the power cord and/or power plug is damaged, do not use the power
synchronized unit and contact your sales representative or your maintenance
engineer. Never attempt to repair the power synchronized unit by yourself. Not
doing so may cause electric shock or fire.
Unplug
• If the power synchronized unit overheats, gives off smoke or an unusual odor,
makes an unusual sound, or shakes abnormally, immediately disconnect the
power plug from the socket. After the problem has subsided, contact your
sales representative or your maintenance engineer. Never attempt to repair
the power synchronized unit by yourself. Not doing so may cause electric
shock or fire.
• If any liquids such as water or foreign objects like metal fragments get into the
power synchronized unit, immediately disconnect the power plug from the
socket. Then, contact your sales representative or your maintenance engineer.
Do not attempt to repair the power synchronized unit by yourself. Doing so
may cause electric shock or fire.
• If the power synchronized unit is dropped or covers are damaged, immediately
disconnect the power plug from the socket. Then, contact your sales
representative or your maintenance engineer. Do not attempt to repair the
power synchronized unit by yourself. Doing so may cause electric shock or fire.
9
Copyright 2017 FUJITSU LIMITED

Safety Precautions

P3AM-8012-10ENZ0