ETL600
2.
SAFETY INSTRUCTIONS
2.1.
Safety information
The ETL600 equipment itself is safe and without any risk. This is not
valid for its containment and the peripheral surrounding, like the high
voltage area and lines. Only service personnel is therefore allowed to
execute all the steps and manipulations described in this manual.
Some of the operations may also be carried out by operators, refer to
section 1.
2.1.1.
In this instruction manual
In this manual the safety instructions are marked as follows:
DANGER
Caution
Note:
2.1.2.
On the equipment
On the Equipment, safety instructions are marked as follows:
DANGER
Caution
Caution
hot surface
Caution
ESD
Safety Instructions
1KHW001489-EN
Information or do's and don'ts to prevent serious
personal injury or extensive equipment damage.
Specific information or do's and don'ts to prevent
minor damage and operating problems.
Specific information with regard to the optimum use of
the appliance.
Hazardous voltage and hazardous energy level.
Beware of electric shock.
Specific information to prevent minor damage and
operating problems.
Specific information to prevent person
damage due to contact to hot surfaces.
Specific information to prevent equipment damage
by electrostatic discharge.
November 2005
ABB Switzerland Ltd
al injury or
2-1