Storage, Decommissioning And Disposal; Safety Instructions - ABB ETL600 Instruction Manual

ETL600
10.

STORAGE, DECOMMISSIONING AND DISPOSAL

10.1.

Safety instructions

Personnel qualification
DANGER
Mechanical Installation
DANGER
DANGER
ESD protection
Caution
ESD
Electrical Installation
DANGER
DANGER
DANGER
Storage, Decommissioning and Disposal
1KHW001489-EN
An authorized and properly trained personnel only is
admitted to carry out installing, programming,
commissioning, maintenance, troubleshooting and
work of the equipment.
The equipment must be mounted in a cabinet.
Cabinets, which are not secured to the floor, tip
forwards when the hinged frame is opened. Do not
open the hinged frame without precautions.
The modules in this equipment contain devices,
which can be damaged by electrostatic discharges.
Appropriate measures must be taken before
unpacking modules or withdrawing them from
equipment racks. Essential precautions to prevent
ESD damage when handling or working on modules
are grounding straps for technical personnel and the
provision of anti-static workbenches. Modules may
only be shipped either in their original packing or
installed in equipment racks.
The circuit breaker for the power supply (B9AS) of
the equipment must be switch OFF.
The circuit breakers for optional equipment in the
cabinet must be switch OFF.
Do not connect or disconnect energized cables to or
from the equipment.
The isolating terminals from the external cables
must be kept open during installation, maintenance
and before storage, decommissioning and disposal.
ABB Switzerland Ltd
November 2005 10-1