Service Telephone Q8Ab; Licenses; Table 11-1 Available License Keys - ABB ETL600 Instruction Manual

ABB Switzerland Ltd
Existing ETL500 systems or dial up modems can also be connected to
this station bus via one R7AP kit.
11.2.2.9.

Service Telephone Q8AB

The telephone set includes a cable to be connected to the service
telephone socket at the frontplate of the AF interface O4LE.
11.3.

Licenses

The basic equipment ETL600 contains all the functions described in
this Instruction Manual, but with MOD600 and NSK600 modems
disabled.
License keys need to be ordered depending on how many modems
are required. The license key is based on a hardware device mounted
on the RF-converter P4LT, a so called iButton that can be replaced if
an upgrade is necessary, for example.
The iButtons are marked with a colored label that represents the
following licenses:
Order Number:
1KHW001480R0001
1KHW001480R0002
1KHW001480R0003
1KHW001480R0004
1KHW001480R0005
1KHW001480R0006
Remark to Table 11-1
1) Only 3 NSK modems are available, if one of the modems is
configured for 9600 bps.
Note:
Note:
11-4
1KHW001489-EN
Number of modems:
0 MOD600, 0 NSK600
0 MOD600, 2 NSK600
0 MOD600, 4 NSK600
1 MOD600, 0 NSK600
1 MOD600, 2 NSK600
1 MOD600, 4 NSK600
Table 11-1 Available license keys
When using the HMI600 in the off-line operation mode,
all the parameters for MOD600 and NSK600 channels
can be configured without restrictions.
But downloading of the corresponding settings to the
equipment is only possible if the appropriate license key
is mounted on P4LT.
An iButton must always be mounted on P4LT even if no
MOD600 and no NSK600 modems are required
(corresponds to the 'License white', refer to Table 11-1).
For mounting the iButton, refer to the Programming and
Testing instructions 1KHW001493 in the annex.
November 2005
ETL600
iButton color label:
LICENSE WHITE
LICENSE BLUE
1)
LICENSE GREEN
P P
LICENSE YELLOW
LICENSE ORANGE
1)
LICENSE RED
P
P
Options