Section 2 Dnp3 Data Mappings; Overview; Point List For The Ieds - ABB REB650 Manual

1MRK 511 419-UUS A
Section 2
2.1
2.2
Table 1: Signal point list
Function name Signal type
Hardware input and output monitoring
BIM Binary inputs
Table continues on next page
650 series 2.2 ANSI
Point list manual
DNP3 data mappings

Overview

This document describes the available DNP3 data points and structures in the IEDs.
The data points are unmapped as a default. The point list tables represents the superset
of available DNP3 data points in these IEDs. The actual set of available points depends
on the product, optional functionalities and configuration.
The DNP3 points can be freely added, removed, reorganized and reconfigured using
PCM600.
As a default, the class assignments are Class 0 and Class 3 for binary inputs and
outputs and for double bit indications. The class assignment for analog inputs and for
counters are Class 0 and Class 2. Analog values are provided with default scalings. The
scalings can be freely modified.
The point list table only shows the signals of the first instance of each function if more
than one instance of a function can be configured.
Signals with user-defined names are listed with their default name in the point list
table.
See the engineering manual and DNP3 communication protocol manual
for more information.

Point list for the IEDs

Signal name
STATUS
BI1
BI2
BI3
Description
Binary input module status
Binary input 1
Binary input 2
Binary input 3
Section 2
DNP3 data mappings
GUID-EC7D1F5E-FFE0-4837-B02A-45E1CD531A94 v3
GUID-88A55057-7A4C-4EB3-8E7A-19AD2821D5CA v4
11