ABB REB650 Manual page 59

1MRK 511 419-UUS A
650 series 2.2 ANSI
Point list manual
3.6 DOUBLE-BIT Capabilities
BINARY INPUTS Static (leave tick-boxes blank if
(Steady-State) Group this data type is not
Number: 3 Event Group supported)
Number: 4
● Fixed at 1000
○ Configurable, range
_______ to _______
○ Configurable,
selectable from
____,____,____
○ Configurable, other,
describe:
3.7 BINARY OUTPUTS Capabilities
AND BINARY OUTPUT (leave tick-boxes blank if
COMMANDS this data type is not
Binary Outputs Group supported)
Number: 10
Binary Output Events
Group Number: 11
Binary Output
Commands Group
Number: 12
Binary Output Command
Events Group Number:
13
3.7.1 Minimum pulse time allowed with Trip, Close, and Pulse On commands:
● Fixed at ______ms
(hardware may limit this
further)
○ Based on point Index.
Comment: Not shorter
than the application
thread the Automation
Bits function block is
executing in.
3.7.2 Maximum pulse time allowed with Trip, Close, and Pulse On commands:
● Fixed at 4294967296
ms (hardware may limit
this further)
○ Based on point Index
(add column to table in
part 5)
3.7.3 Binary Output Status included in Class 0 response:
Table continues on next page
DNP3 protocol implementation
Current Value If configurable, list
methods
Current Value If configurable, list
methods
5, 20 or 100 ms
4294967296 ms
Section 3
53