Section 5
Mounting
5.3.4
5.3.4.1
28
IEC06000135 V3 EN-US
Figure 6:
How to reach the connectors on the rear side of the IED.
PosNo
1
2
3
Side-by-side 19" rack mounting
Overview
IED case size 1/2 x 19" or 3/4 x 19" and RHGS cases can be mounted side-by-side
up to a maximum size of 19". For side-by-side rack mounting, the side-by-side
mounting kit together with the 19" rack panel mounting kit must be used. The
mounting kit has to be ordered separately.
Use only the screws included in the mounting kit when mounting
the plates and the angles on the IED. Screws with wrong dimension
may damage the PCBs inside the IED.
1
80 mm
Description
Screw
Screw
Rear protection cover
1MRK 514 026-UEN B
3
IEC06000135-2-en.vsd
Type
M4x10
M5x8
(Ordered separately)
IP10323-1 v1
M11974-3 v3
670 series 2.2 IEC
Installation manual
2