Appendix 6 - Error & Diagnostics Information - ABB SM1000 User Manual

APPENDIX 6 – ERROR & DIAGNOSTICS INFORMATION
Error Message
"The system has not finished updating the files in the storage card folder.
Please re-insert the storage card now. WARNING: Failure to do so may
result in lost data on the storage card."
"Would you like the system to format the storage card folder so that the
system can use it? WARNING: If you select Yes, all files on the storage
card folder will be erased!"
"The storage card folder has been sucessfully formatted. It contains
XXMb of usable space"
"An error occured while formatting the storage card folder"
The unit runs slowly and the red archive arrow is on continually, even
when there is apparently no unarchived data to catch-up
100
Re-insert the storage card immediately and press the
the error message.
If the card is thought to be formatted correctly, press the
cancel formatting. Remove the card and re-insert. If the error persists
press the key to format the card. Note this erases all data on the
card.
Press the key.
Press the key to clear the message box. Remove the card and try
again. If the error persists, try another card.
If a very large number of files (>500) exist in the SM1000 directory on the
removable media card, some delay may be experienced during archiving.
In such circumstances it is advisable to backup the data and format the
card.
Action
key to clear
key to