Adjusting Screen Contrast; Making Changes To Parameters - ABB SM1000 User Manual

4.2.1 Adjusting Screen Contrast – Fig. 4.4
4.3 Making Changes to Parameters – Figs. 4.5 to 4.7
Configuration Tab
Parameter
Parameter Value
Notes.
• The appropriate data entry box is displayed automatically – see Fig. 4.6.
• Use the key to open the Configuration menu in order to select a different channel – see Fig. 4.11, page 58.
Fig. 4.4 Adjusting Screen Contrast
Channel 1.1
Analog i/p Alarm A Totalizer
Set Up
4.0 - 20.0 mA
Input Type
0 to 20000 Litres/sec
Engineering range
8 Character
Short tag
20 Characters
Long tag
In seconds
Filter time constant
110%
Fault detect level (%)
Upscale
Broken sensor detection
Sub-menu
Analog i/p A1
Higher-level windows
remain visible to identify
configuration structure
Use the
highlight a selection.
Press the
Fig. 4.5 Locating Parameter Settings
Adjust the contrast to the required level using the
1
(0 = darkest and 100 = lightest).
Press the key to save selected contrast level
2
or
Press the key to cancel the selection.
Edit Button
Channel 1.1
Type milliamps
Linearizer type Linear
Electrical range low 4.0
Electrical range high
20.0
Analog i/p A1
location within the
Selection List
and keys to
key to accept
the selection
4 CONFIGURATION...
and
Channel 1.1
Type
Off
millivolts
milliamps
Electrical range low
Volts
Resistance
Electrical range high
Resistance thermometer
Thermocouple
keys
41