Totalizer Log - ABB SM1000 User Manual

...2 OPERATION
2.8 Totalizer Log – Fig. 2.8
Notes.
• The Totalizer log view is displayed only if the Totalizer option is fitted.
• The Totalizer log view provides an historical log of totalizer activity. To view the current totalizer status, choose the Process
or Digital View.
• When the number of entries in the Totalizer log has reached that defined in 'Totalizer log size' (see Section 4.4.4), the
oldest data is overwritten by the newest. Entries are renumbered so that the number of the oldest entry is always 00.
• The logging of totalizer values can be triggered at pre-determined intervals and/or by digital signal – see 'Log update' in
Section 4.6.5.
Totalizer Icon
Log Entry Number
Batch total at the
time of the event
Max., min. and
average of the value
being totalized at the
time of the event
20

Totalizer Log

No Tag/Value
00 Total Daily In Flow
0005402801 Litres
225.4 l/hr
110.9 l/hr
201.0 l/hr
01 Total Daily Out Flow
0005403191 Litres
235.8 l/hr
110.9 l/hr
210.0 l/hr
02 Total Daily Out Flow
0005403120 Litres
Selects
Process
Group 1
Selects the
Audit Log
For a description of the Totalizer Icons (displayed in the Totalizer Log
and the Process View), refer to the Rear Foldout.
Note. Maximum, Minimum and Average statistics are not
shown unless enabled in the Filters menu – see overleaf.
Fig. 2.8 Totalizer Log
28/03/00
28/03/00
14:52:00
14:52:00
Source Tag Date Time
In Flow 28/03/00
Out Flow 28/03/00
Out Flow 28/03/00
Opens the
Operator Menu for
the current view
View previous
page of data
Oldest
14:52
Data
14:52
15:01
Newest
Data
View next page
of data