ABB SM1000 User Manual page 21

...2.7 Alarm Event Log
Configuration
Set Up
Filter
Group 1 Alarms
Group 2 Alarms
Operator Messages
Active Transitions Only
Alarm Acknowledge
Group 1 Alarms
Group 2 Alarms
Ch 1.1 Level
Ch 1.2 Pressure
Ch 1.3 In Flow
Ch 1.4 Out Flow
Ch 1.5 Temp
Ch 1.6 Alarm 1
All
Select the Configuration level – see Section 4.
Select the Setup level – see Section 3.
Select the entries to be displayed in the Alarm Event log.
Notes.
• Hiding and displaying log entries does not affect the recording of events in the log.
• All selected alarm event transitions (from inactive to active, from active to
acknowledged, from acknowledged to inactive, from active to inactive) appear in the
sequence in which they occurred.
• Selecting 'Active Transitions Only' displays entries for alarms when made active and
hides all acknowledged & inactive transistions.
The alarm event log is not group specific. To acknowledge a particular alarm, use the
and keys to first select the relevant process group followed by the alarm to be
acknowledged.
To acknowledge all active alarms in the selected process group simultaneously, select 'All'
and press the key.
Note. If an alarm in
the other
continues to be displayed in the status bar. If an active alarm in
unacknowledged, the icon is surrounded by a red flashing border.
If neither alarm on a particular channel is configured, the short channel tag is greyed-out in
the menu.
process group is active, the Global Alarm status icon (
2 OPERATION...
Indicates the entries selected.
process group is
the other
19
,
)