ABB ACS800 Hardware Manual page 73

Connecting the power cables of units with EMC filter +E202. Frame size R8 with bottom entry and exit.
Step Instruction
11 It is recommended to make a 360
degrees grounding for the input
cable in the same way as for the
motor cable.
12 Connect the twisted shield of the
input cable to the PE busbar of
the cabinet.
13 Connect the phase conductors of
the input cable to the U1, V1 and
W1 terminals.
14 Fasten the shroud.
Connecting the power cables of units with EMC filter +E202. Frame size R8 with top entry and exit.
Step Instruction
1 Remove the shroud in front of the
input terminals.
2 Remove the EMC screens by
undoing the fastening screws.
Phone: 800.894.0412 - Fax: 888.723.4773 - Web: www.clrwtr.com - Email: info@clrwtr.com
Photo
U1 V1 W1
13 13 13
12
PE
11
Photo
2
EMC screens removed
73
10
Installation